LMAS Research Reports - 1999
Download all Research Reports from 1999(pdf)
Research Report Index
CODEF RESEARCH REPORTS
Professor David Dornfeld, Burr Prevention and Minimization for the Aerospace Industry, University of California, Berkeley
C. H. Chu, A Framework for Burr Minimization in a CAD/CAM Integrated Environment, Sponsored by:CODEF
Geometric Approaches for Enhancing Edge Quality in Planar Milling (I): by Adjusting the Radial Depth of Cut, Sponsored by:CODEF
Geometric Approaches for Enhancing Edge Quality in Planar Milling (II): by Adjusting Tool Positions, Sponsored by:CODEF
Geometric Approaches for Enhancing Edge Quality in Planar Milling (III): Tool Exit Detection and Correction in a 2D Free-Form Contour, Sponsored by:CODEF
C. H. Chu & C. Brennum, Prediction and Simulation of Milling Burr Formation for Edge-Precision Process Planning, Sponsored by:CODEF
C. H. Chu, An Experimental Study on Edge Defects in End Milling of Al-6061, Sponsored by:CODEF
J. Kim, Investigation on the Geometric Characteristics of Drilling Burr in Stainless Steel, Sponsored by:CODEF
Development of a drilling burr control chart for stainless steel, Sponsored by:CODEF
Probabilistic Approach of Burr Type Prediction with the Drilling Burr Control Chart, Sponsored by:CODEF
S. Min, Control Chart of Drilling Exit Burr in Low Carbon Steel (AISI4118), Sponsored by:CODEF
Construction of Drilling Burr Expert System, Sponsored by:CODEF
Mesh Separation Criteria in Finite Element Simulation for Drilling Burr Formation, Sponsored by:CODEF
Investigation of the Interlayer Burrs by Drilling of Multi-Layered Materials, Sponsored by:CODEF
B. Shyu, Burr Reduction by Tool Design, Sponsored by:CODEF
S. Kumar, Unified Approach to Burr Prediction System, Sponsored by:CODEF
A. Rangarajan, Avoiding Tool Exit in Planar Milling by Adjusting Width of Cut, Sponsored by:CODEF
P. Brambilla, Burr Formation in Drilling of Aluminum Alloy, Sponsored by:CODEF
D. Bellon, Study on burr formation in carbon steel boring, Sponsored by:CODEF
PRECISION MANUFACTURING RESEARCH REPORTS
Professor David Dornfeld, Process Monitoring and Control for Precision Manufacturing, University of California, Berkeley
Y. Lee & A. Chang, Ultraprecision Cutting and Acoustic Emission Monitoring of OFHC Copper, Sponsored by: LMA Affiliates
Probabilistic Analysis of Ductile/Brittle Transition in Diamond Turning of Brittle Materials, Sponsored by: NSF/UC SMART
Y. Lee, V. Piaggio, & Y. H. Lim, Effect of Material Directionality in Precision Diamond Turning of OFHC Copper, Sponsored by: NSF/UC SMART
J. Luo, Investigation of Material Removal Mechanism in Chemical Mechanical Polishing (CMP): Theory and Modeling, Sponsored by: NSF and UC SMART
Process Modeling of Chemical Mechanical Polishing (CMP), Sponsored by: NSF and UC SMART
K. Bevans, Characterization of CMP Polishing Pads Using Pyrene Fluorsence, Sponsored by: CSM
A. Chang, Endpoint Detection for CMP using Acoustic Emission, Sponsored by: UC-SMART #97-01
E. Wu, Adaptive Controller for Precision Machining Process, Sponsored by: Industry Affiliates of the LMA
