Graduate Program Handbook
5.1 Master of Science Degree Requirements (Plan II)
This Plan is the common master’s degree plan in our department; very rarely do students choose to complete Plan I. The primary differences between Plan II and Plan I is Plan II requires 24 units (see below for details) and an Oral Presentation and Report, while Plan I requires 20 units and a Thesis (see Section 5.2 for details).
Normative Time
1.5 years or 3 semesters
Minimum Number of Units To Complete Degree
24 Semester Units
Course Restriction: Must be either in 200 series or 100 elective upper division series. At most, one third of the total units of course work may be taken S/U
Minimum Number of Mechanical Engineering Units
12 Semester Units
Course Restriction: Must be in 200 series and letter-graded with the exception of the optional 4 units of ME 299 that can be included in the 12
Minimum Units To Be Registered Each Semester
Students must enroll in 15 units each semester.
Maximum Amount of Independent Study Units (298, 299, 300 And Above)
The maximum units in which you can enroll per semester are listed below.
- 298s: 8 units
- 299s: 12 units
- 300s: 6 units
Please note that only 4 units of 299 can be counted towards the 24 unit total requirement.
Minimum Required Number of Units in Major Field Area (ex. Bioeng, Controls, Etc.)
12 Semester units
Course Restriction: Must be in 200 or 100 elective upper division series
Residency, Minimum GPA, and P/NP & S/U
To be eligible to receive the Master’s degree, the student must complete at least two semesters in residency and undertake the total coursework units defined for the program, earning a CGPA of at least 3.0. Only courses with a C- or better can count towards graduate requirements.
Please note that only 1/3 of your unit total at the time of graduation may be pass/not pass or satisfactory/unsatisfactory. Please note that to earn a “pass” or a “satisfactory” grade in a graduate course you need a grade of B- or better.
Maximum Number of Units You Can Transfer Towards Your Master’s Degree
A master’s student may transfer up to 4 semester units or 6 quarter units of course work completed as a graduate student at another institution. The units must be equivalent to courses in the student’s graduate program at Berkeley, and the student must have received at least a B in the course(s) and have a grade-point average of at least 3.3 at both Berkeley and the other institution. However, students cannot use units from another institution to satisfy the minimum unit requirement in 200 series courses or the minimum academic residence requirement. In addition, they may not present course work previously used to satisfy requirements for another degree program at Berkeley or at another institution.
Berkeley undergraduates who take graduate course work during their last undergraduate semester may petition to backdate graduate standing in order to receive graduate credit for that course work. Graduate standing may be backdated from the last semester, and students may petition for credit only for the course work that was not required for the undergraduate degree.
All petitions to have units transferred must be first approved by the Vice-Chair for Graduate Study, then forwarded to Graduate Division. Detailed restrictions can be found in Graduate Division’s Guide to Graduate Policy.
Advancement to Candidacy
Before you can receive a Master’s degree, you must first be Advanced to Candidacy. The opportunity for this occurs during the first four (4) weeks of each semester. By Academic Senate regulation, a minimum period of study of one term must intervene between formal advancement to candidacy and the conferring of the master’s degree.
Please complete the Application for Candidacy for Master’s Degree Form and bring it to 6189 Etcheverry Hall for processing.
Filing Your Master’s Report (Plan II)
After you have written your report, formatted it correctly, assembled the pages into the correct organization, and obtained your signatures, you are ready to file your report (Plan II). The steps are as follows:
- Convert your report to a standard PDF file.
- Complete, sign, and convert the Library Permission Form to a standard PDF file. Each student filing a master’s report must also submit a completed library permission form, stating whether or not the student is willing to allow the University Library to supply copies of the report to any interested persons immediately, or if permission to do so should be withheld (for up to two years).
- Students who wish to register their copyright with the U.S. Copyright Office (not required), can find related information at the following links:
- https://copyright.universityofcalifornia.edu/ownership/ ;
- https://copyright.universityofcalifornia.edu/ownership/student-works.html.
- Students who wish to register their copyright with the U.S. Copyright Office (not required), can find related information at the following links:
- Log on your account on the College of Engineering Student Progress Summary Database webpage.
- Under “Document Type”, select “Library Permission”.
- Under “Upload File”, click on “Choose file” to browse and navigate through your computer to locate and select your signed library permission form. You should see your file name displayed near the menu “Choose File”.
- Click on “submit” at the bottom of your summary page. Once your file is successfully uploaded, you will see it on the page.
- Repeat the same procedure to upload your Master’s Report.
Note: DO NOT SUBMIT A DRAFT. Once your report has been submitted, you will not be allowed to make changes. Be sure that it is in its final form and the cover-page is signed by the committee members!
Please note that all documents should be submitted together (e.g. signed Report and the signed Library Permission Form). The Graduate Student Services Office will not accept lone signature pages. You must submit your electronic report before 4:00 P.M. on the indicated deadline date listed on the Graduate Division’s website.
Oral Presentation and Final Report (Plan II)
An oral presentation and a written report are required. 2 Faculty are required to be present. At least one needs to be from the MS Committee. All committee members are required to be members of the Berkeley Division of the Academic Senate.
Degree Committee Members
Two committee members are needed for the report:
- Your Research Advisor
- ME Professor or Professor outside the ME department
- At least one committee members must be from ME
- Both members must also be members of the Berkeley Division of the Academic Senate
5.2 Master of Science Degree Requirements (Plan I)
Generally, this Plan is used by some people who are funded by government projects whose sponsors require them to write a thesis as a component/stipulation of their support. It is not a common option. For Plan II requirements please see Section 5.1.
Normative Time
1.5 years or 3 semesters
Minimum Number of Units To Complete Degree
20 Semester Units
Course Restriction: Must be either in 200 series or 100 elective upper division series
Minimum Number of Mechanical Engineering Units
8 Semester Units
Course Restriction: Must be in 200 series and letter-graded
Minimum Units Required To Be Registered Each Semester
Students must enroll in 15 units each semester
Maximum Amount of Independent Study Units (298, 299, 300 And Above)
The maximum units in which you can enroll per semester are listed below.
- 298s: 8 units
- 299s: 12 units
- 300s: 6 units
Please note that only 4 units of 299 can be counted towards the 20 unit total requirement.
Residency, Minimum GPA, and P/NP & S/U
To be eligible to receive the Master’s degree, the student must complete at least two semesters in residency and undertake the total coursework units defined for the program, earning a CGPA of at least 3.0. Only courses with a C- or better can count towards graduate requirements.
Please note that only 1/3 of your unit total at the time of graduation may be pass/not pass or satisfactory/unsatisfactory. Please note that to earn a “pass” or a “satisfactory” grade in a graduate course you need a grade of B- or better.
Minimum Recommended Number of Units in Major Field Area (E.g. Bioeng, Controls, Etc.)
8 Semester units from 200 or 100 upper division series
Maximum Number of Units You Can Transfer Towards Your Masters Degree
A master’s student may transfer up to 4 semester units or 6 quarter units of course work completed as a graduate student at another institution. The units must be equivalent to courses in the student’s graduate program at Berkeley, and the student must have received at least a B in the course(s) and have a grade-point average of at least 3.3 at both Berkeley and the other institution. However, students cannot use units from another institution to satisfy the minimum unit requirement in 200 series courses or the minimum academic residence requirement. In addition, they may not present course work previously used to satisfy requirements for another degree program at Berkeley or at another institution.
Berkeley undergraduates who take graduate course work during their last undergraduate semester may petition to backdate graduate standing in order to receive graduate credit for that course work. Graduate standing may be backdated from the last semester, and students may petition for credit only for the course work that was not required for the undergraduate degree.
All petitions to have units transferred must be first approved by the Vice-Chair for Graduate Study. The Vice-Chair then forwards the petitions to Graduate Division.
Detailed restrictions can be found in Graduate Division’s Guide to Graduate Policy.
Advancement to Candidacy
Before you can receive a Master’s degree, you must first be Advanced to Candidacy. The opportunity for this occurs during the first four (4) weeks of each semester. By Academic Senate regulation, a minimum period of study of one term must intervene between formal advancement to candidacy and the conferring of the master’s degree. The form can be found on in Chapter 13.
Thesis
Thesis Committee
Three (3) committee members are needed for the thesis (please see restrictions below). All committee members are required to be members of the Berkeley Division of the Academic Senate.
- Your Research Adviser
- ME Professor
- Professor outside of the ME Department
- At least two committee members must be from ME
- All members must also be members of the Berkeley Division of the Academic Senate
Procedures for Filing Your Thesis
After you have written your thesis, formatted it correctly, assembled the pages into the correct organization, and obtained your signatures, you are ready to file it with the UC Berkeley’s Graduate Division:
- Convert your thesis to a standard PDF file.
- Print and sign the Thesis Release Form.
- Email your thesis as an attachment to edegrees@berkeley.edu. Put your full name in the subject line. Note: DO NOT SUBMIT A DRAFT. Once your thesis has been submitted, you will not be allowed to make changes. Be sure that it is in its final form!
- The Degrees Office staff will review your submission and if everything is in order, you will receive an email stating that it has been approved. If you need to make changes, you will be given the opportunity and will need to re-send a revised PDF.
- Submit the following final documents to the Graduate Degrees Office at 318 Sproul Hall: your signed approval page, and your signed Thesis Release Form.
- Submit a copy of the final documents to the Student Services Office at 6189 Etcheverry Hall.
Please note that all documents should be submitted together (the Graduate Degrees Office will not accept lone signature pages, for example). You must submit your electronic thesis and bring your final documents to 318 Sproul Hall before 4:00 P.M. on the last day of the term.
For details about filing requirements, including information on deadlines, preparing the thesis, registration, and use of human or animal subjects, please see Instructions for Preparing and Filing Your Thesis (http://grad.berkeley.edu/policies/guides/thesis-filing/) and Policies Affecting Both Master’s and Doctoral Students.
Changes in Committee Membership
Before planning to file their theses, students who wish to change the membership of their thesis committee must be sure that such a change has been approved by the Graduate Division. A student may request a change in committee by submitting a completed Change in Higher Degree Committee form. The Head Graduate Adviser (who is our Vice Chair of Graduate Study) must state the reason for the change and sign the form. The Head Graduate Adviser, rather than any committee member, has the final authority to approve the changes. Forms are available from the Graduate Division website.
Library Permission Form
Each student filing a master’s thesis must also submit a completed Library Permission Form, stating whether or not the student is willing to allow the University Library to supply copies of the thesis to any interested persons immediately, or if permission to do so should be withheld (for up to two years) while the student applies to obtain copyright.
5.3 5th Year Masters of Science Degree Requirements
Normative Time
1 year (2 consecutive semesters)
Minimum Units of Units To Complete Degree
24 Semester Units
Independent Study Courses such as, but not limited to, ME 298 and ME 299 do not count towards this total. This is a coursework and comprehensive oral exam only degree.
Course Restriction: All courses taken to fulfill degree requirements must be either in 100 or 200 series.
Minimum Number of Mechanical Engineering Units
12 Semester Units of ME-sponsored courses (must be in 200 series and letter-graded). The non-MechE side of a crosslisted course does not count in this category of requirements.
Remaining 12 Units
12 Semester Units of upper-division and graduate level courses (must be in either 100 or 200 series). These units can come from the following categories:
- College of Engineering Courses
- Department of Mathematics
- Department of Statistics
- Biological Sciences
- Physical Sciences
- School of Information
- School of Business
- School of Public Policy
A strong priority is given to courses that are technical in nature. Other courses can be petitioned to the Vice Chair through the MechE Student Services Office.
Course selection must be approved by our Vice Chair for Graduate Study, as well as exceptions to take courses outside of this list. To receive approval, please bring your Confirmation of Class Schedule to 6193 Etcheverry Hall prior to the beginning of the semester for processing.
Minimum GPA, P/NP & S/U
To be eligible to receive the Master’s degree, the student must complete at least two semesters in residency and undertake the total coursework units defined for the program, earning a CGPA of at least 3.0. Only courses with a C- or better can count towards graduate requirements.
Please note that only 1/3 of your unit total at the time of graduation may be pass/not pass or satisfactory/unsatisfactory. Please note that to earn a “pass” or a “satisfactory” grade in a graduate course you need a grade of B- or better.
Minimum Units Required To Be Registered Each Semester
As a graduate student in the 5th year BS/MS Program in ME, each student in this program must enroll in a minimum of 12 semester units each semester.
Backdating Graduate Standing
Berkeley undergraduates who take graduate course work during their last undergraduate semester may petition to backdate graduate standing in order to receive graduate credit for that course work (for a maximum of 4 units). Graduate standing may be backdated for only one semester, and students may petition for credit only for course work that was not required for the undergraduate degree. The form can be found at 5-year Handbook section 5.
Advancement To Candidacy
Students should apply for Advancement to Candidacy early in their second semester. The form can be found at 5-year Handbook section 5.
Oral Comprehensive Examination
You must arrange for your Comprehensive Oral Examination when you Advance to Candidacy for the Master’s Degree during the beginning of your second semester.
Your Examination Committee consists of
- Two professors who are members of the Berkeley Academic Senate. Generally speaking, this means that they are tenure-track Professors.
- At least one of the members of your Examination Committee has to be from the Mechanical Engineering Department.
Please note that both members of your Oral Exam Committee must be present at the time of the exam.
The Oral Comprehensive Examination must be scheduled at least 45 days before the end of your second semester. The examination is scheduled for 30 minutes. Questions will be drawn from upper division 100 and 200 level courses taken during the first semester of your masters program, though exceptions to this can be granted due to extenuating circumstances.
At the conclusion of your examination, the Committee Members will sign your Report on the BS/MS 5 Year Completion Examination Form. Should you not pass the examination, you are eligible to retake the exam with the same committee members. Retakes should take place within 2 weeks of your first examination.
5.5 Preliminary Exam
The objective of the Preliminary Examination is the early assessment of a student’s potential for satisfactory completion of the doctoral degree. The exams are entirely closed – no books or notes are allowed.
Please note that Masters-only students who do not plan to move on to the PhD do not have to take the Preliminary (Prelim Exam).
All students admitted to the MS/PhD program on entry are required to take the examination. Students who have entered with a declared MS degree goal and who wish to add PhD or D.ENG degree must pass the examination, and apply through the general Online Application for Admission and Review cycle. This policy is to ensure a transparent, thorough, and fair application review process, independent from an applicant’s current or past enrollment at Berkeley. There is no need for these applicants to submit the former “Application for Readmission” or the “Change of Major” forms. The students will need to submit their official GRE scores, and all the PhD required materials listed on the admissions webpage.
For more details about taking the Prelim, please see the Prelim Section of Chapter 7.
6.1 Master of Engineering Degree
This new and accelerated Professional Program has been designed in collaboration with several other department in the College of Engineering and its purpose is to develop professional leaders who understand the technical, environmental, economic and social issues involved in Mechanical Engineering. This one-year program is being launched with support from the College of Engineering’s Coleman Fung Institute for Engineering Leadership. For more information about this interdisciplinary program, please see the Fung Institute Website.
6.2 Master of Engineering Degree Requirements
Normative Time
9 months or 2 semesters
Minimum Number of Units To Complete Degree
25 Semester Units (must be in 200 series)
Minimum Number of Mechanical Engineering Units In Area Of Concentration
12 Semester Units
Course Restriction: Must be in 200 series and letter-graded
Minimum Number of Core Leadership Curriculum Units
6 Semester Units
Course Restriction: Must be in 200 series and letter-graded
These must consist of:
Fall Boot Camp: August 7 – 17, 2018 (including weekends)
- ENGIN 270A (Organizational Behavior & Negotiations), 1 unit
- ENGIN 270B (R&D Tech Management & Ethics), 1 unit
Fall Semester
- ENGIN 270K (Coaching for High Performance Teams), 1 unit
Spring Boot Camp: January 7 – 18, 2019 (including weekends)
Students must choose 1 of the options below to meet core requirement
- ENGIN 270D (Entrepreneurship), 1 unit
- ENGIN 270E (Strategy & Analysis), 1 unit
Additionally
Students must choose 1 of the options below to meet core requirement
- ENGIN 270F ( Data Analytics), 1 unit
- ENGIN 270G (Marketing & Product Management), 1 unit
Spring Semester Core Requirement
- ENGIN 270C (Project Management & Capstone Integration), 1 unit
Maximum Number of Capstone Project Units (296M A-B)
5 Semester Units of ENGIN 296M A-B (letter graded) can be counted towards the 25 unit total requirement. The semester enrollment restrictions for these courses are as follows:
- 2.5 Semester Units – Fall
- 2.5 Semester Units – Spring
2 semester Units of Capstone Integration Course (ENGIN 295)
- 1 Semester Unit – Fall
- 1 Semester Unit – Spring
Students are required to complete a capstone project. The project enables the student to integrate the core leadership curriculum with the concentration and gain hands-on industry experience.
Minimum Grade Point Averages (GPAs)
All students are required to have a minimum overall Grade Point Average of 3.0. Only courses with a C- or better can count towards graduate requirements.
Minimum Units You Are Required In Order To Be Registered Each Semester
Full-time students must enroll in 12 units each semester.
Maximum Number of Units You Can Transfer Towards Your Masters of Engineering Degree
A Master of Engineering student may petition to transfer up to 4 semester units or 6 quarter units of 200-level courses completed as a graduate student at another UC campus. They may not present course work previously used to satisfy requirements for another degree program at another institution.
Berkeley undergraduates who take graduate course work during their last undergraduate semester may petition to backdate graduate standing in order to receive graduate credit for that course work. Graduate standing may be backdated from the last semester, and students may petition for credit only for the course work that was not required for the undergraduate degree.
All petitions to have units transferred must be first approved by the Vice Chair for Graduate Study. He then forwards the petitions to Graduate Division.
Detailed restrictions can be found in Graduate Division’s Guide to Graduate Policy:
http://grad.berkeley.edu/policy/
Advancement To Candidacy
Students should apply for Advancement to Candidacy at the beginning of their second semester. The form can be found on the department website.
Comprehensive Exam and Report
An oral presentation and a written report of the capstone project are required by the end of the Spring Semester. The audience at the oral presentation must consist of ME Advisor, instructor(s), peers and industry partners.
Two committee members are needed for the report:
- Your ME Advisor
- ME or Professor outside the ME department
- At least one committee member must be from ME
- Both individuals must also be members of the Berkeley Division of the Academic Senate
6.3 Tentative Schedule of Classes
(By Area of Concentration) for the 2018-2019 Academic Year
6.3.1 – Advanced Energy Technology
Fall
- Mech Eng 246 – Advanced Energy Conversion Principles
- Mech Eng 250A – Advanced Conductive and Radiative Transport (formerly listed as ME 292E)
- Mech Eng 255 – Advanced Combustion Process
Spring
- Mech Eng 250B (3 units) – Advanced Convective Tranport and Computational Methods (formerly ME 252) Scheduled on Tu/Th 9:30 – 11 am (NEW)
- Mech Eng 254 (3 units) – Thermodynamics I (NEW)
- Mech Eng 256 (3 units) – Combustion
- Mech Eng 259 (3 units) – Microscale Thermophysics and Heat Transfer
6.3.2 – Modeling and Simulation of Physical Processes and Systems
Fall
- Mech Eng C224 – Mechanical Behavior of Engineering Materials
- Mech Eng 280A – Introduction to the Finite Element Method (REQUIRED)
- Mech Eng 290D – Solid Modeling and CAD/CAM Fundamentals
Spring
- Mech Eng C201(3 units) – Modeling and Simulation of Advanced Manufacturing Processes (required)
- Mech Eng 221 (3 units) – Graduate Introduction to Lean Manufacturing Systems (NEW)
- Mech Eng 229 (3 units) – Design of Basic Electro-Mechanical Devices
- Mech Eng 280B (3 units) – Finite Element Methods in Nonlinear Continua
6.3.3 – Experiential Advanced Control Systems Design
Fall
- Mech Eng C231A / El Eng C220B (3 units)- Experiential Advanced Control Design I (required)
- Mech Eng C232 / El Eng C220A (3 units) – Advanced Control Systems I
- Mech Eng 292B – 002 (3 units) – Feedback Control of Legged Robots (new to MEng)
- Mech Eng 292B – 003 (3 units) – Control and Dynamics of Unmanned Aerial Vehicles (new to MEng)
Spring
- Mech Eng C231B / El Eng C220C (3 units) – Experiential Advanced Control Design II (Tentatively scheduled on Tu/Th from 12:30 – 2 pm) (required)
- Mech Eng C237 (3 units) – Control of Nonlinear Dynamic Systems. Scheduled on
- Tu/Th 2 – 3:30 pm (NEW)
- Mech Eng 233 (3 units) – Advanced Control Systems II
- Mech Eng 235 (4 units) – Design of Microprocessor-Based Mechanical Systems
6.3.5 – Product Design
Fall
- Mech Eng 224 ( 3 units) – Mechanical Behavior of Engineering Materials
- Mech Eng C231A / El Eng C220B (3 units) – Experiential Advanced Control Design
- Mech Eng 239 (4 units) – Advanced Design and Automation
- Mech Eng C278 (3 units) – Advanced Designing for the Human Body
- Mech Eng 290D (3 units) – Solid Modeling and CAD/CAM Fundamentals
- Mech Eng 292C-001 (3 units)- Human-Centered Design Methods
- Mech ENg 292C-002 (4 units) – Upper-Limb Prosthesis Design
Spring
- Mec Eng C205 (3 units) – Critical Making on Mondays from 10 – 12 noon – NEW (Enrollment by application only. Application available in end of October)
- Mech Eng 229 (3 units) – Design of Basic Electro-Mechanical Devices
- Mech Eng 235 (4 units) – Design of Microprocessor-Based Mechanical Engineering
- Mech Eng 290H (3 units) – Green Product Development: Design for Sustainability – Day/Time TBD. (NEW)
- Mech Eng 292C-001 (3 units) – “Reimagining Mobility” Room shared with DesInv 181 and taught on Tu/Th 3 – 4:30 pm. (Enrollment by application/instructor permission only. Application link: https://goo.gl/forms/5s12A9L0HAZ2np9c2) (NEW)
- Mech Eng 292C-002 (3 units) – “Global Product Development” Room shared with DesInv 190-002 and the lecture time is Tu/Th 11 – 2pm. (ENROLLMENT: This course is open to master’s students and PhD candidates who have prior experience with the human-centered design process. Admission to the course is by application. The application deadline is October 31st and the form can be found at: http://gpd.jacobshall.org ) (NEW)
6.3.6 – Biomechanics
Fall
- Mech Eng C278( 3 units) – Advanced Designing for the Human Body
- Mech Eng 224 (3 units) – Mechanical Behavior of Engineering Materials
- Mech Eng 239 (3 units) – Advanced Design and Automation
- Mech Eng 290D (3 units) – Solid Modeling and CAD/CAM Fundamentals
Spring
- Mech Eng C210 (3 units) – Advanced Orthopedic Biomechanics
- Mech Eng C213 (3 units) – Fluid Mechanics of Biological Systems
- Mech Eng C215 (3 units) – Advanced Structural Aspects of Biomaterials
- Mech Eng C225 (3 units) – Deformation and Fracture of Engineering Materials
6.4 Area of Concentration Advisors
| AREA | AREA OF CONCENTRATION ADVISOR | OFFICE | PHONE | SEMESTER | |
| Biomechanics | Grace O’Connell | 5122 EH | g.oconnell@berkeley.edu | 642-3739 | FL 18 only |
| Shawn Shadden | 5126 EH | shadden@berkeley.edu | 664-9800 | SP 19 | |
| Advanced Energy Technology | Chris Dames | 6107 EH | cdames@berkeley.edu | 643-2582 | FL 18 Only |
| Van Carey | 6123 EH | vcarey@me.berkeley.edu | 642-7177 | SP 19 Only | |
| Experimental Advanced Control Systems Design | Francesco Borrelli | 5133 EH | fborrelli@berkeley.edu | 643-3871 | FL 18 – SP 19 |
| Modeling & Simulation of Physical Processes & Systems | Sara McMains | 5145 EH | mcmains@me.berkeley.edu | 852-9359 | FL 18 Only |
| Hayden Taylor | 6159 EH | hkt@berkeley.edu | 642-4901 | SP19 Only | |
| Product Design | Dennis Lieu | 5128 EH | dlieu@me.berkeley.edu | 642-4014 | SP 19 Only |
| Alice Agogino | 200E Blum Hall | agogino@berkeley.edu | 643-5316 | FL 18 Only |
7.1 PhD Degree Requirements
Normative Time
5 years or 10 semesters
Minimum Number of Units
30 Semester units. For students who are in the process of obtaining or have obtained their master’s degrees at UC Berkeley, master’s degree units that meet the restrictions below can be used towards their PhD unit requirement.
Minimum Units Required In Order to Be Registered Each Semester
Students must enroll in 15 units each semester
Maximum Amount of Independent Study Units (298, 299, 300 and Above)
Independent course units are not counted towards the 30 semester units needed to graduate. The maximum units in which you can enroll per semester are listed below.
- 298s: 8 units
- 299s: 12 units
- 300s: 6 units
- 600s: 8 units
Maximum Number of Courses That Can Be Transferred Towards Degree
- Students can transfer up to 2 courses from another school towards the PhD
- Courses must be in the major field of study
- Courses must be letter graded
- You cannot have used the course(s) for credit to receive your BS degree
- Courses cannot be from the student’s undergraduate course of study; courses must have been taken while in graduate standing
Notes on Transferring Courses
Unit credit from Backdated Graduate Standing:
Berkeley undergraduates who take graduate course work during their last undergraduate semester may petition to backdate graduate standing in order to receive graduate credit for that course work. Graduate standing may be backdated for only one semester, and students may petition for credit only for the course work that was not required for the undergraduate degree. To petition to backdate courses, please see the ME Student Services Office.
- For a complete list of restrictions regarding transferring units, please see the Guide to Graduate Policy.
To Transfer:
- Obtain an official transcript from the school the course will transfer from as well as a syllabus of the course
- Complete your portion of the Graduate Petition to Transfer Courses and attach the syllabus to this form.
- Obtain the syllabus of the UCB equivalent course as well as the approval of the instructor who would teach the equivalent course here.
- Attach all materials to the form and submit it to the ME Student Services Office for review.
GSI/ME 300-Level Course Requirement
Each student must take a 300-level course on teaching pedagogy. The pedagogy course is also a pre-requisite to serve as a Graduate Student Instructor (GSI).
Minimum Grade Point Averages (GPAs)
All students are required to have the following minimum Grade Point Averages:
- 3.5 in Major
- 3.0 in Minors
In order for students to be in good standing, they must maintain an overall grade-point average of at least 3.0 on the basis of all upper division and graduate courses (100 and 200 level) taken in graduate standing. Only courses with a C- or better can count towards graduate requirements. Grade-points earned in Berkeley courses numbered below 100 or above 300 are not included in determining a student’s grade-point average for remaining in good standing or earning a degree. Only 1/3 of your unit total at the time of graduation may be pass/not pass or satisfactory/unsatisfactory. Please note that to earn a “pass” or a “satisfactory” grade in a graduate course you need a grade of B- or better.
Failure to maintain this minimum GPA can result in your being placed in Academic Probation. If you cannot raise your cumulative GPA back to the minimum GPA or higher in the next semester after being put on academic probation, you are subject to dismissal from the University.
Required Number of Courses
- 5 Courses in your major, all of which must be letter graded
- 3 Courses in your First Outside ME Minor (only 1 of these courses can be taken with the Satisfactory/Unsatisfactory option rather than letter graded)
- 2 Courses in your Inside ME or 2nd Outside ME Minor, all of which must be letter graded
Required Emphases
Each student must declare 1 Major area as well as 2 Minors. At least one Minor is required to be outside of the department. The minor fields should serve to broaden the base of the studies and lend support to the major field as well as the dissertation research.
Required Emphases Notes
- Each minor program should have an orientation different from the major program and the courses involved should contain concepts not present in the major program.
- One minor program should consist of courses taken outside of the Mechanical Engineering department. The qualifier that minors should lend support to the major field as well as the dissertation research should be taken strictly. In general, minors that neither lend support to the major field nor the dissertation research are discouraged. These include minors in areas outside of engineering, mathematics, statistics and natural sciences, unless they lend support to the dissertation research. Examples of minors that generally are not allowed include education, languages, and business, unless these courses demonstrably lend support to the dissertation research or the courses for the minor are cross-listed with a Department in the College of Engineering other than Mechanical Engineering.
- Three courses (of advanced undergraduate and graduate level) typically represent a minimum program for a minor. In some programs of study, a minor that consists only of high-level, upper-division courses taken in a department outside the College of Engineering may be acceptable.
- Use of the number 298 shall be restricted to “Group Studies, Seminars, and Group Research.” No 298 units shall count toward the minimum unit requirements for master or doctoral degrees. All 298 courses in the College of Engineering are offered on a “Satisfactory/ Unsatisfactory” basis.
- The qualifier that minors should lend support to the major field as well as the dissertation research should be taken strictly. As the intent of the qualifying examination is to ascertain the breadth of a student’s knowledge and preparation in their field of study, the minors play a critical role in this demonstration of breadth. The use of mechanical engineering courses, including cross-listed courses, as part of an outside minor is not permitted except by petition to the Vice Chair for Graduate Study. In selecting your minors you should work with both your research and major field academic advisors in identifying the minors that are best suited to your doctoral research and academic program, and then obtain the approval of your major field advisor regarding your selections.
Procedures to Change Major Field Areas
In order to change major, you must either request the transfer during the first three weeks of your FIRST semester or have taken and passed the preliminary examination. You must also take and pass the Preliminary Examination in the new major field area.
After your first semester, you will need to meet with the Major Field Advisor (MFA) of the area you wish to transfer into. If the MFA approves your transfer they need to notify the ME Student Services Office by email.
Preliminary Examination (also known as Prelims)
This written exam covers various undergraduate and graduate coursework. All students must pass the exam in their Major Field Area. Those students who do not have an exam in their major field must select one of the other available exams as their declared Major Field Area exclusively for the Preliminary Examination requirement purpose. Students receive 2 attempts to pass the exam. Please see the FAQ on the department website for the latest information. Please note that students must have a minimum graduate GPA of 3.3 overall and 3.5 in the major field from courses taken at UC Berkeley to take the Preliminary Examination.
- The examination will be given twice a year, the first week of the Spring and Fall semesters. The examination must be taken following two semesters of registration as a graduate student at the latest. Tests cannot be taken before entering the program.
Completing a Master’s Degree as Part of an MS/PhD
For each degree you plan on earning, you must first Advance to Candidacy for that degree. I.e. if your goal is to earn the MS/PhD, you are required to Advance twice – once for the MS and once for the PhD. Students should advance to MS Candidacy by their 3rd semester. The opportunity to apply occurs during the first two (2) weeks of each semester.
Both the Advancement to Candidacy Form for Plan I and the Advancement to Candidacy Form for Plan II are completed in consultation with your Major Field Advisor. Both the Major Field Advisor and the Vice Chair of Graduate Study must sign these forms prior to being sent to the Graduate Division for Advancement.
Filing Your MS Report
The Engineering Library requires uniformity in the Title Page and binding of your MS Report. The Engineering Library will not accept ring bindings for your Report. It should be a plastic braded binding. Most copy stores will be familiar with the binding style and examples can be found at the ME Student Services Office. Once you have presented your MS Report to your committee, you need to bring a signed, bound copy of the MS Report to the Student Services Office. All reports are filed in the Engineering Library at Bechtel.
Qualifying Examination
This is an oral exam which covers courses and research. Students should submit the required paper work at least 1 month in advance of the scheduled exam date. In addition, the exam should be taken no later than the end of student’s 3rd year/6th semester. Students receive 2 attempts to pass.
To be eligible to take the Qualifying Examination, the following coursework requirements must be completed:
- 3 courses in the major for a GPA of 3.5, all of which must be letter graded
- 1 course in the inside or first minor for a GPA of 3.0
- 2 courses in the outside minor for a GPA of 3.0
Qualifying Exam Committee Requirements
- Chair (must be ME faculty member)
- Additional Member
- Additional member (representing your Inside or first Minor)
- The Academic Senate Representative (ASR – representing your Outside Minor)
Qualifying Exam Membership
- The Chair of the committee must be from ME Department.
- At least 2 members must be from the ME Department.
- A Co-Chair of a Student’s Dissertation Committee can sit as an additional member, but cannot serve as the Chair or the Academic Senate Representative of the Qualifying Examination Committee.
- The Chair of the Qualifying Examination Committee cannot serve as the Chair of the Dissertation Committee for the same student. However, this rule does not preclude the research advisor from serving on the QE committee (e.g. as additional member.)
- Two members of the qualifying examination committee represent the major field area, the third member must represent the first minor, and the fourth member represents the second minor (outside). A list of ME faculty and their areas can be found in the Research Areas and Major Fields section.
- All Qualifying Examination Committee Members must be Members of the Berkeley Division of the Academic Senate.
- There cannot be Co-Chairs for the Qualifying Exam.
- One additional member beyond the required number may be added to the Qualifying Examination Committee.
- Two members beyond the required number may be requested by the Vice-Chair of Graduate Study in a memorandum addressed to the cognizant Associate Dean, in care of the Graduate Services: Degrees Office (318 Sproul Hall, #5900).
- If a student is reexamined, the committee for the second examination must be the same as for the first exam.
- Permission to take the exam must be obtained from the Graduate Division and they require at least a three week notice minimum to approve your request for taking the Qualifying Examination.
- If there is a serious need to change your Qualifying Exam Committee, please log in your CalCentral and complete the “Higher Degree Committee Form” under “Student Resources”, as far in advance of the exam as possible. All changes must be reviewed and approved by the Vice-Chair of Graduate Study and then the Graduate Division to be official. There is no guarantee that requests will be granted.
Detailed requirements can be found in Graduate Division’s Guide to Graduate Policy.
Program of Study Form (To Schedule the Qualifying Exam)
When you and your research advisor decide on the time of your Qualifying Exam (at least a few months in advance to ensure room availability), you will need to complete a Program of Study for Doctoral Candidates. List all classes you have taken as a graduate student at Berkeley. They are to be organized and listed in your required major and two minors. At the bottom of the card please provide the date, time and location of the examination. All courses that are used toward the major and the first minor must be taken for a letter grade prior to taking the qualifying examination. The exceptions are ME research units (298s, 299s), 300-level and 600-level courses. At most, one third of the total units may be taken S/U.
After having completed the form, please submit it to your Graduate Student Affairs Adviser in the Student Services Office for the approval and signature of the Vice Chair, and to reserve a room for your exam or receive a zoom link if the exam will be conducted virtually.
Add your Higher Degree Committee to CalCentral for Vice-Chair of ME and the Graduate Division for the Dean’s approval.
Advancement To Candidacy
For each degree you plan on earning, you must first Advance to Candidacy for that degree. I.e. if your goal is to earn the MS and PhD, you are required to Advance twice – once for the MS and once for the PhD. After you pass the Qualifying Exam you will be asked to complete the advancement to candidacy application (Higher Degree Committees Form) in CalCentral under “Student Resources“. You need to complete and submit the form within three (3) weeks of passing the examination. It is important that you submit this application as soon as possible as:
- You cannot go on Filing Fee or file your dissertation if you are not Advanced to Candidacy;
- You must be Advanced to Candidacy for at least two (2) semesters before you graduate. The semester you advance to candidacy counts as the first semester.
The Advancement to Candidacy eForm (Higher Degree Committees Form) are completed in consultation with your Research Advisor.
Doctoral Candidacy Review
The Graduate Council of the Academic Senate requires a Doctoral Candidacy Review (DCR) to be completed each year for all doctoral students after they advance to candidacy until completion of their degree. This review is designed to assist you to stay on track and help facilitate the completion of your doctoral program in a timely manner.
The Doctoral Candidacy Review form is located online through the CalCentral.
After completion of report, you will need to notify your dissertation committee chair and schedule a meeting to review it. Once you have met with your dissertation chair then they will complete their section of the report and submit the APR through GLOW.
PhD Dissertation
Dissertations are required of all students. Each dissertation committee must include:
- Chair (Student’s Research Advisor)
- Additional Member (representing one of the student’s minor)
- Academic Senate Representative (representing one of the student’s minor, generally the outside minor)
Dissertation Committee Notes
- Two co-chairs may replace one chair (one of these may be a faculty member in a department other than ME). In this case, the committee will end up with four members. However, in the end you must have more ME faculty than those of any other department in your committee.
- The Dissertation Chair or Co-Chair cannot be the same person as the Chair of the Qualifying Examination for the same student.
- If there is a serious need to change your Dissertation Committee, please complete the eForm “Higher Degree Committees Form” in your CalCentral under “Student Resources” as far in advance of the exam as possible. All changes must be reviewed and approved by the Vice-Chair of Graduate Study and then the Graduate Division to be official and there is no guarantee that requests will be granted.
All members of the dissertation committee must be members of the Berkeley Division of the Academic Senate. Detailed requirements and restrictions can be found in Graduate Division’s Guide to Graduate Policy.
Turning In Your Dissertation
- All PhD Dissertations must now be submitted on line. You will submit the dissertation as a PDF document in a single copy via ProQuest/UMI’s ETD Administrator site.
- The document will be reviewed by staff in the Graduate Services Degrees unit for formatting.
- When the dissertation is in an acceptable form, the student will submit the “Final Signature Submission” eForm, and complete the two exit surveys on the Tasks checklist in CalCentral.
- After conferral of the degree for the semester in question, the PDF will be forwarded to the University Library and to ProQuest/UMI for release to the public. A doctoral candidate will be able to request with the support of the dissertation committee chair that the dissertation be withheld under certain circumstances from release to the public for a reasonable length of time. A form for this purpose will be available through the Forms and Application section of the Graduate Division web site.
For further details see Instructions for Preparing the Filing Your Thesis or Dissertation or contact Assistant Director for Degrees, Jeret Lemontt (lemontt@berkeley.edu), (510) 642-7330.
PhD Candidate Seminar
Each student must present their dissertation findings with at least one member of their dissertation committee present during a public exit seminar held in-person, virtually, or in hybrid mode (in-person and virtual). The seminar must take place prior to filing the dissertation, and before the end of the semester in which you receive your degree.
Setting Up Your Seminar
- Complete the Ph.D. Seminar form with the proposed date and time of the seminar, as well as the abstract of the talk.
- Check with the ME Student Services Office to confirm your room reservation or Zoom link (if the seminar is virtual).
- The ME Student Services Office will announce the date, time and details of the talk to the department.
- If the seminar is strictly in person, complete your portion of the Ph.D. Candidate Seminar Form and take it to your seminar.
- Obtain the signatures of any faculty present from your committee.
- Return the form to the ME Student Services Office.
7.2 PhD Recommended Courses
The lists of recommendation have been compiled to assist you in selecting courses to achieve your program objective. Because there is a wide spectrum of students’ interests within the different areas, each list has been divided into either two or three groups. The first group is comprised of core courses, which are recommended to all students in the specified program. The second and third groups are suggested for enhancing your specialty area. To ensure that you are making adequate progress toward your degree goal, you should consult with your Major Field Advisor each semester before registering for classes.