Technical Electives
These courses may be counted toward the Department's 15 unit Technical Elective Requirement. Of these 15 units, 9 are required to be Mechanical Engineering-Sponsored Upper Division.
In addition to this list, students may use up to 3 total units of graded research (ME H194 or ME 196) or may also consider petitioning Graduate Level (200+) MechE technical courses to count. If you would like to take a technical course outside of this list, please submit a Yellow Petition to your ESS advisor. Please contact ESS for a Yellow Petition template.
If ever you hope to earn credit for an ME course not on this list OR for a course taken elsewhere (be it outside our department, another UC, a community college or other four-year university, or as part of a study abroad program), you should petition for equivalency before you take the course as we do not guarantee approval of any equivalency request.
JOINT MAJORS: Please consult the Undergraduate Student Affairs Officer in 6193 Etcheverry Hall before considering to take courses outside of the department to fulfill technical elective requirements. You need prior written permission to do so and permission is not guaranteed.
CATEGORIES
COURSE LIST
| COURSE NUMBER & CATALOG DESCRIPTION | TITLE & SYLLABI (if applicable) |
| Bioengineering and Related Topics Electives | |
| MEC ENG C115 / BIO ENG C112 | Molecular Cell Biomechanics |
| MEC ENG C117 / BIO ENG C117 | Structural Aspects of Biomaterials |
| MEC ENG 118 | Introduction to Nanotechnology and Nanoscience |
| MEC ENG 119 | Introduction to MEMS (Microelectromechanical Systems) |
| MEC ENG 120 | Computational Biomechanics Across Multiple Scales |
| MEC ENG C166 | Introduction to Compressible Flow |
| MEC ENG 167 | Microscale Fluid Mechanics |
| MEC ENG C176 / BioE C119 | Orthopedic Biomechanics |
| MEC ENG C178/ BioE C137 | Designing for the Human Body |
| MEC ENG 185 | Introduction to Continuum Mechanics |
| CHM ENG 170A | Biochemical Engineering |
| CHM ENG 170B | Biochemical Engineering |
| CHM ENG C170L | Biochemical Engineering Laboratory |
| CIV ENG 114 | Environmental Microbiology |
| EL ENG C145B | Medical Imaging Signals and Systems |
| EL ENG C145L | Introductory Electronic Transducers Laboratory |
| EL ENG C145M | Introductory Microcomputer Interfacing Laboratory |
| INT BIO 131 | General Human Anatomy |
| INT BIO 132 | Survey of Human Physiology |
| Controls/Mechatronics/Robotics & Automation and Related Electives | |
| MEC ENG 101 | High Mix/Low Volume Manufacturing |
| MEC ENG 130 | Design of Planar Machinery |
| MEC ENG 131 | Vehicle Dynamics and Control |
| MEC ENG 133 | Mechanical Vibrations |
| MEC ENG C134 / EL ENG C128 | Feedback Control Systems |
| MEC ENG 135 | Design of Microprocessor-Based Mechanical Systems |
| MEC ENG 136 | Introduction to Control of Unmanned Aerial Vehicles |
| MEC ENG 146 | Energy Conversion Principles |
| MEC ENG 175 | Intermediate Dynamics |
| MEC ENG 190L | Practical Control System Design: A Systematic Loopshaping Approach |
| MEC ENG 190M | Model Predictive Control |
| MEC ENG 190Y | Practical Control System Design: A Systematic Optimization Approach |
| MEC ENG 193B | Feedback Control of Legged Robots |
| ENG 177 | Advanced Programming with MATLAB |
| CHM ENG 162 | Dynamics and Control of Chemical Processes |
| CIV ENG C154 | Introduction to Urban and Regional Transportation Planning |
| CIV ENG 155 | Transportation Systems Engineering |
| CIV ENG 167 | Engineering Project Management |
| EL ENG 105 | Microelectronic Devices and Circuits |
| EL ENG C106A | Introduction to Robotics |
| EL ENG 113 | Power Electronics |
| EL ENG 117 | Electromagnetic Fields and Waves |
| EL ENG 119 | Introduction to Optical Engineering |
| EL ENG 120 | Signals and Systems |
| EL ENG 121 | Introduction to Digital Communication Systems |
| EL ENG 122 | Introduction to Communication Networks |
| EL ENG 123 | Digital Signal Processing |
| EL ENG C125 | Introduction to Robotics |
| EL ENG 126 | Probability and Random Processes |
| EL ENG 127A | Optimization Models in Engineering |
| EL ENG C128 | Feedback Control Systems |
| EL ENG 129 | Neural and Nonlinear Information Processing |
| EL ENG 130 | Integrated-Circuit Devices |
| EL ENG 137A | Introduction to Electric Power Systems |
| EL ENG 140 | Linear Integrated Circuits |
| EL ENG 151 | Introduction to Digital Design and Integrated Circuits |
| EL ENG 142 | Integrated Circuits for Communications |
| EL ENG 143 | Microfabrication Technology |
| EL ENG 144 | Fundamental Algorithms for Systems Modeling, Analysis, and Optimization |
| EL ENG C145B | Medical Imaging Signals and Systems |
| EL ENG C145L | Introductory Electronic Transducers Laboratory |
| EL ENG C145M | Introductory Microcomputer Interfacing Laboratory |
| EL ENG C145O | Laboratory in the Mechanics of Organisms |
| EL ENG 147 | Introduction to Microelectromechanical Systems (MEMS) |
| EL ENG C149 | Introduction to Embedded Systems |
| EL ENG 192 | Mechatronic Design Laboratory |
| IND ENG 170 | Industrial Design and Human Factors |
| Courses that may count towards the Design Requirement | |
| MEC ENG 101 | High Mix/Low Volume Manufacturing |
| MEC ENG C106A | Introduction to Robotics |
| MEC ENG 110 | Introduction to Product Development |
| MEC ENG C117 | Structural Aspects of Biomaterials |
| MEC ENG 118 | Introduction to Nanotechnology and Nanoscience |
| MEC ENG 119 | Introduction to MEMS (Microelectromechanical Systems) |
| MEC ENG 130 | Design of Planar Machinery |
| MEC ENG 133 | Mechanical Vibrations |
| MEC ENG C134 / EL ENG C128 | Feedback Control Systems |
| MEC ENG 135 | Design of Microprocessor-Based Mechanical Systems |
| MEC ENG 139 | Robotic Locomotion |
| MEC ENG 146 | Energy Conversion Principles |
| MEC ENG 151 | Advanced Heat Transfer |
| MEC ENG 165 | Ocean-Environment Mechanics |
| MEC ENG C176 / BioE C119 | Orthopedic Biomechanics |
| MEC ENG C178/ BioE C137 | Designing for the Human Body |
| MEC ENG 179 | Augmenting Human Dexterity |
| ENG 128 | Advanced Engineering Design Graphics |
| CHM ENG 150B | Transport and Separation Processes |
| CHM ENG 154 | Chemical Engineering Laboratory |
| CHM ENG 160 | Chemical Process Design |
| CHM ENG 162 | Dynamics and Control of Chemical Processes |
| CIV ENG 122 | Design of Steel Structures |
| CIV ENG 123 | Design of Reinforced Concrete Structures |
| CIV ENG 124 | Structural Design in Timber |
| CIV ENG 153 | Transportation Facility Design |
| CIV ENG 156 | Infrastructure Planning and Management |
| CIV ENG 169A | Web-Based Systems for Engineering and Management |
| CIV ENG 169B | Database Systems for Engineering and Management |
| CIV ENG 169C | Visualization and Simulation for Engineering and Management |
| CIV ENG 180 | Design, Construction, Maintenance of Civil and Environmental Engineered Systems |
| CIV ENG 191 | Civil and Environmental Engineering Systems Analysis |
| COMP SCI 160 | User Interface Design and Development |
| DES INV 190E | Special Topics in Design Innovation |
| DES INV 190-2 | Global Product Development |
| EL ENG 192 | Mechatronic Design Laboratory |
| IND ENG 170 | Industrial Design and Human Factors |
| NWMEDIA C166 | Critical Practices: People, Places, Participation |
| Dynamics Electives | |
| MEC ENG C134 / EL ENG C128 | Feedback Control Systems |
| MEC ENG C162 / AE 162 | Introduction to Flight Mechanics |
| MEC ENG 170 | Engineering Mechanics III |
| MEC ENG 171 | Dynamics of Charged Particulate Systems: Modeling, Theory & Computation |
| MEC ENG 173 | Fundamentals of Acoustics |
| MEC ENG 175 | Intermediate Dynamics |
| CHM ENG 162 | Dynamics and Control of Chemical Processes |
| Energy Science & Technology Electives/Combustion/Heat & Mass Transfer and Related Topics Electives | |
| MEC ENG 126 / 226L | The Science and Engineering of Cooking |
| MEC ENG 140 | Combustion Processes |
| MEC ENG 146 | Energy Conversion Principles |
| MEC ENG 151 | Advanced Heat Transfer |
| MEC ENG 151 A | Conductive and Radiative Transport |
| MEC ENG 151 B | Convective Transport and Computational Methods |
| MEC ENG 154 | Thermophysics for Applications |
| ENG 117 | Methods of Engineering Analysis |
| CHM ENG 140 | Introduction to Chemical Process Analysis |
| CHM ENG 141 | Chemical Engineering Thermodynamics |
| CHM ENG 142 | Chemical Kinetics and Reaction Engineering |
| CHM ENG 150A | Transport Processes |
| CHM ENG 150B | Transport and Separation Processes |
| CHM ENG 154 | Chemical Engineering Laboratory |
| CHM ENG 160 | Chemical Process Design |
| CHM ENG 162 | Dynamics and Control of Chemical Processes |
| CHM ENG 170A | Biochemical Engineering |
| CHM ENG 170B | Biochemical Engineering |
| CHM ENG C170L | Biochemical Engineering Laboratory |
| CHM ENG 171 | Transport Phenomena |
| CHM ENG 176 | Principles of Electrochemical Processes |
| CIV ENG C106 | Air Pollution |
| CIV ENG 107 | Climate Change Mitigation |
| CIV ENG 108 | Climate Change Adaptation |
| CIV ENG 111 | Environmental Engineering |
| CIV ENG 112 | Water & Wastewater Systems Design and Operation |
| CIV ENG 113N | Ecological Engineering for Water Quality Improvement |
| CIV ENG 114 | Environmental Microbiology |
| CIV ENG 188 | Carbon Capture |
| EL ENG 108 | Introduction to Electric Power and Renewable Energy |
| NUC ENG 101 | Nuclear Reactions and Radiation |
| NUC ENG 102 | Nuclear Reactions and Radiation Laboratory |
| NUC ENG 104 | Radiation Detection and Nuclear Instrumentation Laboratory |
| NUC ENG 107 | Introduction to Imaging |
| NUC ENG 120 | Nuclear Materials |
| NUC ENG 124 | Radioactive Waste Management |
| NUC ENG 130 | Analytical Methods for Non-proliferation |
| NUC ENG 150 | Introduction to Nuclear Reactor Theory |
| NUC ENG 155 | Introduction to Numerical Simulations in Radiation Transport |
| NUC ENG 161 | Nuclear Power Engineering |
| NUC ENG 162 | Radiation Biophysics and Dosimetry |
| NUC ENG 167 | Nuclear Reactor Safety |
| Mathematics 121A/121B | Mathematical Tools for the Physical Sciences |
| Mathematics 128A/128B | Numerical Analysis / Numerical Analysis |
| Fluids and Related Topic Electives | |
| MEC ENG 126 / 226L | The Science and Engineering of Cooking |
| MEC ENG 165 | Ocean-Environment Mechanics |
| MEC ENG C166 | Introduction to Compressible Flow |
| MEC ENG 167 | Microscale Fluid Mechanics |
| MEC ENG 168 | Mechanics of Offshore Systems |
| MEC ENG 185 | Introduction to Continuum Mechanics |
| ENG 117 | Methods of Engineering Analysis |
| CHM ENG 140 | Introduction to Chemical Process Analysis |
| CHM ENG 141 | Chemical Engineering Thermodynamics |
| CHM ENG 142 | Chemical Kinetics and Reaction Engineering |
| CHM ENG 150A | Transport Processes |
| CHM ENG 150B | Transport and Separation Processes |
| CHM ENG 154 | Chemical Engineering Laboratory |
| CHM ENG 160 | Chemical Process Design |
| CHM ENG 162 | Dynamics and Control of Chemical Processes |
| CHM ENG 170A | Biochemical Engineering |
| CHM ENG 170B | Biochemical Engineering |
| CHM ENG C170L | Biochemical Engineering Laboratory |
| CHM ENG 171 | Transport Phenomena |
| CHM ENG 176 | Principles of Electrochemical Processes |
| CIV ENG 111 | Environmental Engineering |
| CIV ENG 112 | Water & Wastewater Systems Design and Operation |
| CIV ENG 113N | Ecological Engineering for Water Quality Improvement |
| CIV ENG 114 | Environmental Microbiology |
| CIV ENG 115 | Water Chemistry |
| CIV ENG 131 | Advanced Mechanics of Materials |
| CIV ENG 173 | Groundwater and Seepage |
| NUC ENG 170A | Nuclear Design: Design in Nuclear Power Technology and Instrumentation |
| NUC ENG 170B | Nuclear Design: Design in Bionuclear, Nuclear Medicine, and Radiation Therapy |
| NUC ENG 175 | Methods of Risk Analysis |
| NUC ENG 180 | Introduction to Controlled Fusion |
| Manufacturing/Manufacturing Management/Materials Processing and Related Topics Electives | |
| MEC ENG 101 | High Mix/Low Volume Manufacturing |
| MEC ENG 110 | Introduction to Product Development |
| MEC ENG C117 / Bio E C117 | Structural Aspects of Biomaterials |
| MEC ENG 122 | Processing of Materials in Manufacturing |
| MEC ENG 127 | Composite Materials--Analysis, Design, Manufacture |
| MEC ENG 133 | Mechanical Vibrations |
| MEC ENG C134 / EL ENG C128 | Feedback Control Systems |
| MEC ENG 130 | Design of Planar Machinery |
| MEC ENG 135 | Design of Microprocessor-Based Mechanical Systems |
| ENG 150 | Basic Modeling and Simulation Tools for Industrial Research Applications |
| MEC ENG 163 | Engineering Aerodynamics |
| MEC ENG 164 | Marine Statics and Structures |
| MEC ENG 165 | Ocean-Environment Mechanics |
| MEC ENG 168 | Mechanics of Offshore Systems |
| MEC ENG 185 | Introduction to Continuum Mechanics |
| MEC ENG 190A | Rapid Prototyping of Mechanical Systems |
| MEC ENG 193G | Special Topics in Manufacturing |
| Comp Sci 184 | Foundations of Computer Graphics |
| ENGIN 120 | Principles of Engineering Economics |
| IND ENG 115 | Industrial and Commercial Data Systems |
| IND ENG 140 | Introduction to Mobile Industrial Robots |
| IND ENG 170 | Industrial Design and Human Factors |
| MATSCI 131 | Additive Manufacturing Processes and Systems for Advanced Materials |
| Materials and Related Topics Electives | |
| MEC ENG C117 / Bio E C117 | Structural Aspects of Biomaterials |
| MEC ENG 127 | Introduction to Composite Materials |
| MEC ENG 167 | Microscale Fluid Mechanics |
| MEC ENG C176 / BioE C119 | Orthopedic Biomechanics |
| MEC ENG 185 | Introduction to Continuum Mechanics |
| MEC ENG 224A | Failure Analysis of Structural Material |
| MEC ENG C225 | Deformation and Fracture of Engineering Materials |
| CHM ENG C178 | Polymer Science and Technology |
| CIV ENG 130N | Mechanics of Structures |
| CIV ENG 140 | Failure Mechanisms in Civil Engineering Materials |
| CIV ENG 175 | Geotechnical and Geoenvironmental Engineering |
| CIV ENG 176 | Environmental Geotechnics |
| CIV ENG 177 | Foundation Engineering Design |
| CIV ENG C178 | Applied Geophysics |
| CIV ENG 179 | Pavement Engineering |
| EE 118 | Introduction to Optical Engineering |
| MAT SCI 102 | Bonding, Crystallography, and Crystal Defects |
| MAT SCI 103 | Phase Transformations and Kinetics |
| MAT SCI 104 | Materials Characterization |
| MAT SCI 104L | Materials Characterization Laboratory |
| MAT SCI 111 | Materials Characterization |
| MAT SCI 112 | Corrosion (Chemical Properties) |
| MAT SCI 113 | Mechanical Behavior of Engineering Materials |
| MAT SCI 117 | Properties of Dielectric and Magnetic Materials |
| MAT SCI C118 | Biological Performance of Materials |
| MAT SCI 120 | Materials Production |
| MAT SCI 121 | Metals Processing |
| MAT SCI 122 | Ceramic Processing |
| MAT SCI 123 | Semiconductor Processing |
| MAT SCI 125 | Thin-Film Materials Science |
| MAT SCI 130 | Experimental Materials Science and Design |
| MAT SCI 136 | Materials in Energy Technologies |
| MAT SCI 140 | Nanomaterials for Scientists and Engineers |
| MAT SCI C150 | Introduction to Materials Chemistry |
| MAT SCI 151 | Polymeric Materials |
| ENGIN 120 | Principles of Engineering Economics |
| IND ENG 115 | Industrial and Commercial Data Systems |
| IND ENG 140 | Introduction to Mobile Industrial Robots |
| IEOR 170 | Industrial Design and Human Factors |
| Mechanics/Theoretical & Applied Mechanics and Related Topics Electives | |
| MEC ENG 127 | Composite Materials--Analysis, Design, Manufacture |
| MEC ENG 133 | Mechanical Vibrations |
| MEC ENG C134 / EL ENG C128 | Feedback Control Systems |
| MEC ENG 163 | Engineering Aerodynamics |
| MEC ENG 165 | Ocean-Environment Mechanics |
| MEC ENG C166 | Introduction to Compressible Flow |
| MEC ENG 167 | Microscale Fluid Mechanics |
| MEC ENG 170 | Engineering Mechanics III |
| MEC ENG 173 | Fundamentals of Acoustics |
| MEC ENG 175 | Intermediate Dynamics |
| MEC ENG C176 / BioE C119 | Orthopedic Biomechanics |
| MEC ENG C180 / CE C133 | Engineering Analysis Using the Finite Element Method |
| MEC ENG C184 / AE C184 / CE C13 | Flight Vehicle Structures and Aeroelasticity |
| MEC ENG 185 | Introduction to Continuum Mechanics |
| ENG 117 | Methods of Engineering Analysis |
| ENG 177 | Advanced Programming with MATLAB |
| CIV ENG 120 | Structural Engineering |
| CIV ENG 121 | Advanced Structural Analysis |
| CIV ENG 122 | Design of Steel Structures |
| CIV ENG 123 | Design of Reinforced Concrete Structures |
| CIV ENG 124 | Structural Design in Timber |
| CIV ENG 130N | Mechanics of Structures |
| CIV ENG 131 | Advanced Mechanics of Materials |
| CIV ENG C133 | Engineering Analysis Using the Finite Element Method |
| CIV ENG 140 | Failure Mechanisms in Civil Engineering Materials |
| CIV ENG 165 | Concrete Materials and Construction |
| CIV ENG 166 | Construction Engineering |
| CIV ENG 171 | Introduction to Geological Engineering |
| CIV ENG 172 | Introduction to Rock Mechanics |
| CIV ENG 175 | Geotechnical and Geoenvironmental Engineering |
| CIV ENG 177 | Foundation Engineering Design |
| MATH 104 | Introduction to Analysis |
| MEMS/Nano and Related Topics Electives | |
| MEC ENG 118 | Introduction to Nanotechnology and Nanoscience |
| MEC ENG 119 | Introduction to MEMS (Microelectromechanical Systems) |
| MEC ENG 130 | Design of Planar Machinery |
| MEC ENG C134 / EL ENG C128 | Feedback Control Systems |
| MEC ENG 138 | Introduction to Micro/Nano Mechanical Systems Laboratory |
| MEC ENG 175 | Intermediate Dynamics |
| MEC ENG C180 / CE C133 | Engineering Analysis Using the Finite Element Method |
| EL ENG 105 | Microelectronic Devices and Circuits |
| EL ENG 113 | Power Electronics |
| EL ENG 117 | Electromagnetic Fields and Waves |
| EL ENG 119 | Introduction to Optical Engineering |
| EL ENG 120 | Signals and Systems |
| EL ENG 121 | Introduction to Digital Communication Systems |
| EL ENG 122 | Introduction to Communication Networks |
| EL ENG 123 | Digital Signal Processing |
| EL ENG C125 | Introduction to Robotics |
| EL ENG 126 | Probability and Random Processes |
| EL ENG 127A | Optimization Models in Engineering |
| EL ENG C128 | Feedback Control Systems |
| EL ENG 129 | Neural and Nonlinear Information Processing |
| EL ENG 130 | Integrated-Circuit Devices |
| EL ENG 140 | Linear Integrated Circuits |
| EL ENG 151 | Introduction to Digital Design and Integrated Circuits |
| EL ENG 142 | Integrated Circuits for Communications |
| EL ENG 143 | Microfabrication Technology |
| EL ENG 144 | Fundamental Algorithms for Systems Modeling, Analysis, and Optimization |
| EL ENG C145B | Medical Imaging Signals and Systems |
| EL ENG C145L | Introductory Electronic Transducers Laboratory |
| EL ENG C145M | Introductory Microcomputer Interfacing Laboratory |
| EL ENG C145O | Laboratory in the Mechanics of Organisms |
| EL ENG 147 | Introduction to Microelectromechanical Systems (MEMS) |
| EL ENG C149 | Introduction to Embedded Systems |
| EL ENG 192 | Mechatronic Design Laboratory |
| Bio Eng 121 | Introduction to Micro and Nanobiotechnology: BioMEMS |
| Physics 141A/Physics 141B | Solid State Physics |
| COMPSCI 162 | Operating Systems and System Programming |
| Chem C191/Physics C191/Comp Sci C191 | Quantum Information Science and Technology |
| Ocean Engineering and Related Topics Electives | |
| MEC ENG 101 | High Mix/Low Volume Manufacturing |
| MEC ENG 127 | Composite Materials--Analysis, Design, Manufacture |
| MEC ENG C134 / EL ENG C128 | Feedback Control Systems |
| MEC ENG 164 | Marine Statics and Structures |
| MEC ENG 165 | Ocean-Environment Mechanics |
| MEC ENG 167 | Microscale Fluid Mechanics |
| MEC ENG 168 | Mechanics of Offshore Systems |
| MEC ENG 185 | Introduction to Continuum Mechanics |
| CIV ENG 120 | Structural Engineering |
| CIV ENG 180 | Design, Construction, Maintenance of Civil and Environmental Engineered Systems |
| Math 170 | Mathematical Methods for Optimization |
| IND ENG 162 | Linear Programming |
| Physics Electives | |
| PHYS C180 | Order-of-Magnitude Physics |
| PHYS 105 | Analytic Mechanics |
| PHYS 110A | Electromagnetism and Optics |
| PHYS 110B | Electromagnetism and Optics |
| PHYS 111A | Instrumentation Laboratory |
| PHYS 112 | Introduction to Statistical and Thermal Physics |
| PHYS 130 | Quantum and Nonlinear Optics |
| PHYS 137A | Quantum Mechanics |
| PHYS 137B | Quantum Mechanics |
| PHYS 138 | Modern Atomic Physics |
| PHYS 141A | Solid State Physics |
| PHYS 141B | Solid State Physics |
| PHYS 142 | Introduction to Plasma Physics |
| PHYS 177 | Principles of Molecular Biophysics |
| Courses that may count towards the Quantitative Science Requirement | |
| MEC ENG C106A | Introduction to Robotics |
| MEC ENG 120 | Computational Biomechanics Across Multiple Scales |
| MEC ENG 127 | Introduction to Composite Materials |
| MEC ENG 131 | Vehicle Dynamics & Control |
| MEC ENG 134 | Feedback Control Systems |
| MEC ENG 136 | Introduction to Control of Unmanned Aerial Vehicles |
| MEC ENG 139 | Robotic Locomotion |
| MECENG C162 / AEROENG C162 | Introduction to Flight Mechanics |
| MECENG 150 | Modeling and Simulation of Advanced Manufacturing Processes |
| MEC ENG 163 | Engineering Aerodynamics |
| MEC ENG C180 | Engineering Analysis Using the Finite Element Method |
| MEC ENG 193B | Feedback Control of Legged Robots |
| MECENG C201 | Modeling and Simulation of Advanced Manufacturing Processes |
| ENGIN 117 (considered ME-Sponsored upper division) | Methods of Engineering Analysis |
| IND ENG 120 | Principles of Engineering Economics |
| ENGIN 150 | Basic Modeling and Simulation Tools for Industrial Research Applications |
| ENGIN 177 (considered ME-Sponsored upper division) | Advanced Programming with MATLAB |
| CHM ENG 162 | Dynamics and Control of Chemical Processes |
| CIV ENG 120 | Structural Engineering |
| CIV ENG 121 | Advanced Structural Analysis |
| CIV ENG 130N | Mechanics of Structures |
| CIV ENG C133 | Engineering Analysis Using the Finite Element Method |
| COMP SCI 189 | Introduction to Machine Learning |
| EL ENG 121 | Introduction to Digital Communication Systems |
| EL ENG 126 | Probability and Random Processes |
| EL ENG 127A | Optimization Models in Engineering |
| EL ENG 144 | Fundamental Algorithms for Systems Modeling, Analysis, and Optimization |
| EL ENG C149 | Introduction to Embedded Systems |
| MATH C103 | Introduction to Mathematical Economics |
| MATH 104 | Introduction to Analysis |
| MATH H104 | Honors Introduction to Analysis |
| MATH 105 | Second Course in Analysis |
| MATH 106 | Mathematical Probability Theory |
| MATH 110 | Abstract Linear Algebra |
| MATH H110 | Honors Linear Algebra |
| MATH 113 | Introduction to Abstract Algebra |
| MATH H113 | Honors Introduction to Abstract |
| MATH 114 | Second Course in Abstract Algebra |
| MATH 115 | Introduction to Number Theory |
| MATH 116 | Cryptography |
| MATH 118 | Fourier Analysis, Wavelets, and Signal Processing |
| MATH 121A | Mathematical Tools for the Physical Sciences |
| MATH 121B | Mathematical Tools for the Physical Sciences |
| MATH 123 | Ordinary Differential Equations |
| MATH 124 | Programming for Mathematical Applications |
| MATH 125A | Mathematical Logic |
| MATH 126 | Introduction to Partial Differential Equations |
| MATH 127 | Mathematical and Computational Methods in Molecular Biology |
| MATH 128A | Numerical Analysis |
| MATH 128B | Numerical Analysis |
| MATH W128A | Numerical Analysis |
| MATH 130 | Groups and Geometries |
| MATH 135 | Introduction to the Theory of Sets |
| MATH 136 | Incompleteness and Undecidability |
| MATH 140 | Metric Differential Geometry |
| MATH 141 | Elementary Differential Topology |
| MATH 142 | Elementary Algebraic Topology |
| MATH 143 | Elementary Algebraic Geometry |
| MATH 151 | Mathematics of the Secondary School Curriculum I |
| MATH 152 | Mathematics of the Secondary School Curriculum II |
| MATH 156 | Numerical Analysis for Data Science and Statistics |
| MATH 160 | History of Mathematics |
| MATH 170 | Mathematical Methods for Optimization |
| MATH 172 | Combinatorics |
| MATH 185 | Introduction to Complex Analysis |
| MATH H185 | Honors Introduction to Complex Analysis |
| MATH 189 | Mathematical Methods in Classical and Quantum Mechanics |
| IND ENG 115 | Industrial and Commercial Data Systems |
| IND ENG 120 | Principles of Engineering Economics |
| IND ENG 130 | Methods of Manufacturing Improvement |
| IND ENG 135 | Applied Data Science with Venture Applications |
| IND ENG 142 | Introduction to Machine Learning and Data Analytics |
| IND ENG 142B | Machine Learning and Data Analytics II |
| IND ENG 145 | Fundamentals of Revenue Management |
| IND ENG 150 | Production Systems Analysis |
| IND ENG 151 | Service Operations Design and Analysis |
| IND ENG 153 | Logistics Network Design and Supply Chain Management |
| IND ENG 156 | Healthcare Analytics |
| IND ENG 160 | Nonlinear and Discrete Optimization |
| IND ENG 162 | Linear Programming and Network Flows |
| IND ENG 164 | Introduction to Optimization Modeling |
| IND ENG 165 | Engineering Statistics, Quality Control, and Forecasting |
| IND ENG 166 | Decision Analytics |
| IND ENG 172 | Probability and Risk Analysis for Engineers |
| STAT C131A | Statistical Methods for Data Science |
| STAT 133 | Concepts in Computing with Data |
| STAT 134 | Concepts of Probability |
| STAT 135 | Concepts of Statistics |
| STAT C140 | Probability for Data Science |
| STAT 150 | Stochastic Processes |
| STAT 151A | Linear Modelling: Theory and Applications |
| STAT 154 | Modern Statistical Prediction and Machine Learning |
| STAT 155 | Game Theory |
| STAT 158 | Experimental Design |
| STAT 159 | Reproducible and Collaborative Statistical Data Science |
| Business Administration and Economics Electives | |
| UGBA 101A | Microeconomic Analysis for Business Decisions |
| UGBA 101B | Macroeconomic Analysis for Business Decisions |
| ECON 100A | Economic Analysis - Micro |
| ECON 100B | Economic Analysis - Macro |
| ECON 101A | Economic Theory - Micro |
| ECON 101B | Economic Theory - Macro |
| ECON C102 | Natural Resource Economics |
| ECON C103 | Introduction to Mathematical Economics |
| ECON 104 | Advanced Microeconomic Theory |
| ECON 121 | Industrial Organization and Public Policy |
| ECON 123 | Government Regulation of Industry |
| ECON C125 | Environmental Economics |
| ECON 131 | Public Economics |
| ECON 133 | Global Inequality and Growth |
| ECON 136/N136 | Financial Economics |
| ECON 138 | Financial and Behavioral Economics |
| ECON 139 | Intermediate Financial Economics |
| ECON 140 | Economic Statistics and Econometrics |
| ECON 141 | Econometric Analysis |
| ECON C142 | Applied Econometrics and Public Policy |
| ECON 155 | Urban Economics |
| ECON 155A | Cities and Public Policy |
| ECON 157 | Health Economics |
| ECON C181/N181 | International Trade |
| ECON 182 | International Monetary Economics |
| Lower Division Options (a maximum of 3 units can be used towards 15 unit requirement) | * = no lab required for fulfillment of tech elective for lower div course |
| ASTRO 7A | Introduction to Astrophysics |
| ASTRO 7B | Introduction to Astrophysics |
| BIO ENG 10 | Introduction to Biomedicine for Engineers |
| BIOLOGY 1A & 1AL | General Biology Lecture |
| BIOLOGY 1B | General Biology Lecture and Laboratory |
| CHEM 1B | General Chemistry |
| CHEM 3A* | Chemical Structure and Reactivity |
| CHEM 3B* | Chemical Structure and Reactivity |
| CHEM 4B | General Chemistry and Quantitative Analysis |
| CIV ENG 11 | Engineered Systems and Sustainability |
| CIV ENG 60 | Structure and Properties of Civil Engineering Materials |
| CIV ENG 70 | Engineering Geology |
| CIV ENG 93 | Engineering Data Analysis |
| COMPSCI C8 | Foundations of Data Science |
| COMPSCI 61A | The Structure and Interpretation of Computer Programs Engineering Data Analysis |
| COMPSCI 61B | Data Structures |
| COMPSCI 61C | Machine Structures |
| COMP SCI 70 | Discrete Mathematics and Probability Theory |
| DES INV 15 | Design Methodology |
| DES INV 90E | Technical Special Topics in Design Innovation |
| EPS 50 | The Planet Earth |
| EL ENG 16B | Designing Information Devices and Systems II |
| ENGIN 11 | A Hands-On Introduction to Radiation Detection |
| LS C30Z | BioInspired Design |
| MATH 55 | Discrete Mathematics |
| MCELLBI C32* | Introduction to Human Physiology |
| MSE 45 | Properties of Materials |
| PHYSICS 7C | Physics for Scientists and Engineers |
| STAT 20 | Introduction to Probability and Statistics |
| STAT 21 | Introductory Probability and Statistics for Business |